Photographic Films

Nitrate film is historically important because it allowed for the development of roll films. The first flexible movie films measured 35-mm wide and came in long rolls on a spool. In the mid-1920s, using this technology, 35-mm roll film was developed for the camera. By the late 1920s, medium-format roll film was created. It measured six centimeters wide and had a paper backing making it easy to handle in daylight. This led to the development of the twin-lens-reflex camera in 1929. Nitrate film was produced in sheets (4 x 5-inches) ending the need for fragile glass plates.
Triacetate film came later and was more stable, flexible, and fireproof. Most films produced up to the 1970s were based on this technology. Since the 1960s, polyester polymers have been used for gelatin base films. The plastic film base is far more stable than cellulose and is not a fire hazard.
Today, technology has produced film with T-grain emulsions. These films use light-sensitive silver halides (grains) that are T-shaped, thus rendering a much finer grain pattern. Films like this offer greater detail and higher resolution, meaning sharper images.

• Film Speed (ISO) — An arbitrary number placed on film that tells how much light is needed to expose the film to the correct density. Generally, the lower the ISO number, the finer grained and slower a film. ISO means International Standards Organization. This term replaces the old ASA speed indicator. The slower the film, the more light is needed to expose it.